CompoXen field guides
Install with clarity.
Build with confidence.
Two focused video guides walk through the essential sequence for a clean CompoXen composite fence and gate installation.
Use these videos as a quick visual reference before and during installation. Always confirm the current product instructions, project drawings, local requirements, and site conditions before work begins.
Composite fence installation
From layout and post setting through rails, boards, and final alignment.
- 01
Plan and mark
Confirm the fence run, corners, gates, grade changes, utility markings, and post locations before digging.
- 02
Set the posts
Keep every post plumb, aligned, correctly spaced, and securely braced while the concrete cures.
- 03
Build the panels
Install the lower rail, composite boards, upper rail, trim, and caps in the sequence shown in the video.
- 04
Complete the review
Check alignment, board engagement, fasteners, clearances, and finish details before cleaning the site.
Composite gate installation
Prepare the opening, assemble the gate, mount the hardware, and fine-tune operation.
- 01
Confirm the opening
Verify the hinge and latch posts are plumb, the opening is square, and the planned swing path is clear.
- 02
Assemble the gate
Build the frame on a level surface, install the composite infill, and confirm the finished dimensions.
- 03
Mount the hardware
Attach hinges to the reinforced post, support the gate level, then install the latch and remaining hardware.
- 04
Adjust and test
Confirm smooth operation, consistent clearances, positive latching, and secure fasteners through the full swing.
Plan for a safe installation.
Contact 811 before excavation, verify property boundaries, follow local codes, and use project-specific engineering when required.